Cartier Iron Intersects Major New Anomalous Alteration Zone

WERBUNG
Smartbroker
WERBUNG
Become An Actor - eBook
WERBUNG
freelancermap.de
WERBUNG
Namefruits
WERBUNG
thekey.ACADEMY
WERBUNG
Gehaltsvorschuss. Sofort!
WERBUNG
KREDIT.DE
WERBUNG
LoopsterPanel
WERBUNG
etexter
WERBUNG
Bürobedarf Blitec

Grading 0.11 g Au/t and 2.65 g Ag/t over 180.4 m at Big Easy in Newfoundland

Bild-New zone is on the west edge of the Central Anomaly located 1.8 km south of the Big Easy Showing
-Includes 40m grading 0.28 g Au/t and 6.34 g Ag/t and 4.8 m grading 1.26 g Au/t and 33.19 g Ag/t
-Hole testing downdip extension of Big Easy showing intersected 10.6m of 0.45 g Au/t and 84.96 g Ag/t including 3.9m grading 0.54 g Au/t and 224.9 g Ag/t.
Toronto, Ontario, December 20, 2018 – Cartier Iron Corporation (CSE: CFE) („Cartier Iron“ or the „Company“) is pleased to report results from the first two diamond drill holes from a four hole, 1,249m program, at its Big Easy Gold project located on the Burin Peninsula in eastern Newfoundland. The first hole, BE18-29, tested the downdip potential of the Big Easy showing while three holes tested the Central Induced Polarization (IP) chargeability anomaly located 1.8km south of the Big Easy showing (see press release May 1, 2018). Hole BE18-30 was drilled on the western edge of the Central Anomaly. Hole BE18-31 was collared 40m west of Hole BE18-30 while hole BE18-32 was collared on the eastern edge of the Central Anomaly 200m east of Hole BE18-30. The Central Anomaly as well as other major chargeability anomalies on the property occur under prominent bogs hence drilling in the core of these anomalies must be carried out in the winter.

Hole BE18-30 intersected a new very wide anomalous alteration zone which returned 180.4 m grading 0.11 g Au/t and 2.65 g Ag/t. Within this extensive zone there is a 40m section which returned 0.28 g Au/t and 6.34 g Ag/t including 4.8m grading 1.26 g Au/t and 33.19 g Ag/t.

Hole BE18-29 which tested the potential downdip extension of the Big Easy Showing returned 10.6m of 0.45 g Au/t and 84.96 g Ag/t including 3.9m grading 0.54 g Au/t and 224.9 g Ag/t. The downdip extension is marked by a chargeability anomaly which appears to be stronger with depth.

Tom Larsen, President & CEO of Cartier Iron said: „Considering the reconnaissance nature of this drill program and the limited meterage of 617m reported, these results are very encouraging and we look forward to receiving the results from the remaining two holes which should be available in the near future. We plan to do a winter drill program in conjunction with efficient accessibility after bog freeze-up of at least 1,000m to further test the Central Anomaly as well as other similar geophysical targets to the west and south.“

Dr. Bill Pearson, P.Geo., Chief Technical Advisor, commented: „The results from Hole BE18-30 indicate that the chargeability anomaly reflects an extensive zone of epithermal alteration and mineralization that is up to 200m wide with a depth extent of at least 250m.The grades are consistently anomalous throughout the entire section suggesting the potential for a well mineralized core zone in the strongest part of the chargeability anomaly (Figures 1 and 2). The mineralized alteration zone was also intersected in the upper part of Hole BE18-31 and the lower part of BE18-32 but results on these holes are pending. This zone is completely open along strike and at depth.“

Qualified Person
Dr. Bill Pearson, P.Geo., a Qualified Person as defined under National Instrument 43-101 (NI 43-101), has reviewed and approved the scientific and technical content of this press release. The IP/Res survey was designed and supervised by Dr. Chris Hale, P.Geo., Chief Geophysicist for Cartier Iron and a Qualified Person as defined under NI 43-101. The diamond drill program was carried out and supervised by Mr. Jeff Burke, P.Geo., Exploration Manager for Cartier Iron on Big Easy and a qualified person as defined by NI 43-101. All samples were analysed using multi-digestion with ICP finish and fire assay with AA finish for gold by AGAT Laboratories in Mississauga, Ontario). Cartier Iron employs an industry standard QA/QC protocol including external standards, blanks and duplicates, with a 5% random split check assay on pulps and rejects by ALS Chemex in North Vancouver, BC.
For more information, contact:

Thomas Larsen, C.E.O. or Jorge Estepa, Vice President at (416) 360-8006 or email at info@cartieriron.com
About Cartier Iron Corporation
Cartier Iron is an exploration and development Company focused on discovering and developing significant iron ore resources in Quebec, and a potentially significant gold property in the province of Newfoundland and Labrador. The Company’s iron ore projects include the Gagnon Holdings in the southern Labrador Trough region of east-central Quebec. The Big Easy gold property is located in the Burin Peninsula epithermal gold belt in the Avalon Zone of eastern Newfoundland.

For additional information on Cartier Iron, please visit our website at www.cartieriron.com

The CSE has not reviewed nor accepts responsibility for the adequacy or accuracy of this release. Statements in this release that are not historical facts are „forward-looking statements“ and readers are cautioned that any such statements are not guarantees of future performance, and that actual developments or results, may vary materially from those in these „forward-looking statements“.

Verantwortlicher für diese Pressemitteilung:

Cartier Iron Corporation
Herr Thomas Larsen
20 Adelaide St E Suite 200
ON M5C 2T6 Toronto
Kanada

fon ..: 416 360 8006
web ..: http://www.cartieriron.com
email : info@cartieriron.com

Pressekontakt:

Cartier Iron Corporation
Herr Thomas Larsen
20 Adelaide St E Suite 200
ON M5C 2T6 Toronto

fon ..: 416 360 8006
web ..: http://www.cartieriron.com
email : info@cartieriron.com

PM-Ersteller
Author: PM-Ersteller

WERBUNG
WERBUNG
WERBUNG
WERBUNG
WERBUNG
WERBUNG
WERBUNG
WERBUNG
WERBUNG
WERBUNG
LoopsterPanel
My Agile Privacy

Diese Website verwendet technische und Profilierungs-Cookies. 

Sie können die Cookies akzeptieren, ablehnen oder anpassen, indem Sie auf die gewünschten Schaltflächen klicken. 

Wenn Sie diese Mitteilung schließen, setzen Sie die Nutzung ohne Zustimmung fort. 

Warnung: Einige Funktionen dieser Seite können aufgrund Ihrer Datenschutzeinstellungen blockiert werden: